>Has anyone come up with a really effective way to block an open banester or >stairway? I faced a similar problem recently and used two big sheets of plexiglass over the spindles. Secure them with some oval head screws, using raised washers to make it look good. For the corners you can use L-shaped molding, painted to match the banister. For a door at the top I constructed my own. Secure a piece of 2x4 ish wood edge wise to the wall with toggle bolts, and hinge the door on that side. On the banister side, I secured anothe piece of wood vertically alongside the post for the door to close against. The door itself is made of plexiglass with a wooden frame and latched with a screw hook. To the banister post when closed, or to the upper landing window sill when open. It opens inward, and everything is slippery enough so they can't climb it. Bill Williamson [Posted in FML issue 2202]