Yesterday I posted on how Pester had foiled all the blocks I made on the sliding plywood used on the glass slider opening going to the back room. This time where the space is between the inside glass panel frame and the sliding door I put a short piece of ply wood in there but is not bolted to an 'L' bracket that is screwed to the glass panel frame. That stopped the crawl escape part. To stop her from forcing the plywood back making a large enough crack to squeeze thru I put a 'Z' bracket on the top that is bolted to the glass frame. That holds the top from being forced back and to keep the foot from being pushed out I simply bore out a circuit board stand off and put a long wood screw thru it to screw into the thresh hold which will keep the bottom from being pushed out. I put this all to the test, and Whammo! Pester is foiled! Ha! Just the same, if a ferret gets it into his/her head to get out in that direction, they will for sure do it. Will be most amazing to see how she does it this time. So far, so good. For now at least. Gordon, Peekaboo and Pester. Rev. J Gordon Bengtson Aarrow-Ranch Aviation Mechanicsville, Virginia 23111 [Posted in FML 6114]